AQT-580FT-XT & AQT-581FT-XT

GAC Filtration Systems

FEATURES & BENEFITS

Filter Media: Aquatrol™ – Activated Carbon MED-GCS-1240 / MED-GCS-830

Filtration Factor: 5 – 10 gpm/ft²

Backwash Factor: 10 – 12 gpm/ft²

Iodine Value: 1050 (min)

Mesh: 8 x 30 & 12 x 40

NSF: Standard 61

Density: 28 lbs/ft³

GAC DIGITAL XT FILTERS SPECIFICATION

Part NumberValveTank SizeGAC (ft³)
FS-GAC-580FT-XT-1054AQT-580FT-XT1210" x 54"1.5
FS-GAC-580FT-XT-1252AQT-580FT-XT1212" x 52"1.75
FS-GAC-580FT-XT-1354AQT-580FT-XT1213" x 54"2
FS-GAC-580FT-XT-1465AQT-580FT-XT1214" x 54"3
FS-GAC-580FT-XT-1665AQT-580FT-XT1216" x 65"4
FS-GAC-581FT-XT-1465AQT-581FT-XT1514" x 54"3
FS-GAC-581FT-XT-1665AQT-581FT-XT1516" x 65"4
FS-GAC-581FT-XT-1865AQT-581FT-XT1518" x 65"5
FS-GAC-581FT-XT-2172AQT-581FT-XT1521" x 72"7
FS-GAC-581FT-XT-2472AQT-581FT-XT1524" x 72"10

Important Note. The flow values and characteristics of Aquatrol carbon are values provided by the filter media manufacturer in its data sheet. The calculations of minimum and maximum flow rates are based on this information. For waters with special characteristics or special amounts of suspended solids, COD or BOD, laboratory tests are recommended to check the performance of the filter media, contact your supplier for more information. DLFCs must be verified by the customer and/or installer to verify that they meet their engineering needs. Aquatrol provides this data for information purposes only and is not responsible for misuse or selection of internal parts.

GAC DIGITAL XT FILTERS SPECIFICATION

Part NumberValveTank SizeGAC (ft³)
FS-GAC-580FT-XT-1054AQT-580FT-XT1210" x 54"1.5
FS-GAC-580FT-XT-1252AQT-580FT-XT1212" x 52"1.75
FS-GAC-580FT-XT-1354AQT-580FT-XT1213" x 54"2
FS-GAC-580FT-XT-1465AQT-580FT-XT1214" x 54"3
FS-GAC-580FT-XT-1665AQT-580FT-XT1216" x 65"4
FS-GAC-581FT-XT-1465AQT-581FT-XT1514" x 54"3
FS-GAC-581FT-XT-1665AQT-581FT-XT1516" x 65"4
FS-GAC-581FT-XT-1865AQT-581FT-XT1518" x 65"5
FS-GAC-581FT-XT-2172AQT-581FT-XT1521" x 72"7
FS-GAC-581FT-XT-2472AQT-581FT-XT1524" x 72"10

Important Note. The flow values and characteristics of Aquatrol carbon are values provided by the filter media manufacturer in its data sheet. The calculations of minimum and maximum flow rates are based on this information. For waters with special characteristics or special amounts of suspended solids, COD or BOD, laboratory tests are recommended to check the performance of the filter media, contact your supplier for more information. DLFCs must be verified by the customer and/or installer to verify that they meet their engineering needs. Aquatrol provides this data for information purposes only and is not responsible for misuse or selection of internal parts.

error: